A Step-by-Step Guide on How to Clean the CZ P-10 C

Regular cleaning and maintenance of your CZ P-10 C is essential to ensure it functions reliably and accurately over the long term. Following the cleaning procedure outlined in the CZ owner's manual will help prevent malfunctions, excessive wear, and maintain optimal performance. Below is a step-by-step guide on how to properly clean the CZ P-10 C.

What You’ll Need (click "Gun Cleaning Gear" in navigation menu for Amazon links):

• Firearm cleaning solvent

• Gun oil or lubricant

• Cleaning patches

• Bore brush and cleaning rod

• Nylon brush or soft-bristle toothbrush

• Microfiber cloth

• Cotton swabs or Q-tips

• A small parts tray (optional)

Step 1: Unload and Ensure Safety

Before beginning any cleaning procedure, ensure the firearm is completely unloaded:

1. Remove the magazine.

2. Lock the slide back and visually and physically inspect the chamber to ensure it is clear of any rounds.

3. Release the slide after confirming the firearm is unloaded.

Step 2: Field Strip the CZ P-10 C

1. Lock the slide back by pulling it rearward and engaging the slide stop.

2. Push the takedown tabs located on both sides of the frame downward to disengage the slide.

3. Release the slide from the frame and pull it forward off the rails.

4. Remove the recoil spring and guide rod assembly.

5. Remove the barrel from the slide by lifting it out.

Step 3: Clean the Barrel

1. Apply a cleaning solvent to a bore brush and insert it into the chamber end of the barrel, scrubbing back and forth to loosen carbon deposits.

2. Run a cleaning patch through the barrel using a cleaning rod until the patches come out clean.

3. Use a cotton swab or patch to clean the feed ramp and chamber area.

Step 4: Clean the Slide

1. Apply cleaning solvent to the inside of the slide, especially around the breech face, extractor, and slide rails, where dirt and residue tend to accumulate.

2. Use a nylon brush or soft toothbrush to scrub these areas thoroughly.

3. Wipe the inside of the slide with a microfiber cloth or clean patch to remove excess solvent and residue.

4. Ensure the firing pin channel and extractor are free of buildup.

Step 5: Clean the Frame

1. Apply solvent to the frame rails and trigger assembly areas where carbon and grime can accumulate.

2. Scrub the inside of the frame and the rails using a nylon brush or toothbrush.

3. Use cotton swabs or Q-tips to clean small areas and hard-to-reach spots within the frame.

4. Wipe the frame clean with a microfiber cloth.

Step 6: Clean the Recoil Spring and Guide Rod

1. Wipe down the recoil spring and guide rod with a solvent-soaked patch or cloth to remove any dirt or carbon.

2. Ensure the assembly is clean and free of debris.

Step 7: Lubricate the CZ P-10 C

Proper lubrication ensures smooth operation and prevents wear:

1. Apply a light coat of gun oil to the exterior of the barrel, especially around the locking lugs.

2. Lightly lubricate the slide rails where the slide makes contact with the frame during operation.

3. Apply a small amount of oil to the recoil spring and guide rod for smoother cycling.

4. Place a drop of oil on the frame rails and the moving parts of the trigger mechanism.

Tip: Avoid over-lubrication, as it can attract debris and cause fouling buildup.

Step 8: Reassemble the CZ P-10 C

1. Place the barrel back into the slide.

2. Reinstall the recoil spring and guide rod assembly into the slide.

3. Align the slide with the frame and carefully slide it back onto the rails.

4. Lock the slide to the rear and rotate the takedown tabs back into place, ensuring the firearm is properly reassembled.

Step 9: Function Check

Perform a quick function check to ensure everything is working correctly:

1. Rack the slide to ensure smooth movement.

2. Dry fire the firearm (after confirming it is unloaded) to check the trigger reset and ensure the trigger functions properly.

Step 10: Final Wipe Down

Wipe down the entire firearm with a microfiber cloth to remove any fingerprints, excess oil, or solvent. This helps protect the finish and prevents corrosion.

Conclusion

With regular cleaning and maintenance, your CZ P-10 C will continue to provide reliable performance for years to come. Proper care is essential to keeping your firearm in excellent working condition, ensuring safety and optimal performance every time you use it.

Click "Gun Cleaning Gear" in the navigation links at the top of this page for the Amazon links. As of today, it’s the most affordable place to purchase your cleaning gear.